Our Products

We offer clients steel shots that are not only superior in quality but also work with precision in the desired applications.

Steel Shots

Steel Shots

Steel shots are spherical grains made of molten steel through centrifugal casting process; these cast steel shots are available in different sizes & hardness. Steel shots are manufactured from steel scrap. Our furnace is electric Induction furnace. Steel scrap is melted in the furnace then being centrifugal casting into shot by water.

We offer clients steel shots that are not only superior in quality but also work with precision in the desired applications. Found to be highly useful in various de-burring applications, these are used in applications for components like:

  • Casting
  • Forging
  • Fabrication
  • Spiral springs
  • Steel torsion springs
  • Automotive components

Chemical and Physical Properties of Steel Shots

Hi-Tech Abrasive Steel Shot
Shape when new Spherical
Screen Analysis As per specification of IS4606/1983
Chemical Analysis

C % - 0.6 to 1.25

Si % - 0.20 to 1.10

S % - 0.080 Max.

P % - 0.080 Max.

Hardness 400 to 500 HV Average
( Lowest & highest individual range from 375 to 550 HV )
Density 7 gm. / ml. Min
Micro-structure Examination at 500X Tempered Martensite

STEEL SHOTS SIZE SPECIFICATION

Steel Grits

Steel Grits

The range of steel grit offered by us is manufactured by crushing fully hardened shot, screening the resulting media & tempering it to a desired hardness. These are produced under controlled manufacturing process to achieve end product bearing uniform hardness, density & microstructure, coupled with needed toughness for durable operations.

Applications:

  • Grit work best in tumblast applications where eccentric rebound aids coverage
  • It is used in coating and/or rust removal where speed of cleaning plays a critical part and somewhat rough finish is acceptable
  • for grinding wheels

Chemical and Physical Properties of Steel Grits

Hi-Tech Abrasive Steel Grit
Shape when new Angular
Chemical Analysis Carbon> 0. 85%
Hardness

750 to 860 HV

Density 7.3 gm. / ml. Min
Micro-structure Examination at 500X Martensite Completely fine & uniform

STEEL GRIT SIZE SPECIFICATION

Steel Ingots

Steel Ingots

We manufacturer duplex steel ingots of sizes 75 mm X 100 mm confirming to IS 2830/2831 standard, which are supply to local and near by state rolling mills where it is further given the shape of angles, channels, door, flats, round, etc.